fuchifichi rc helicopter team
Il nuovo nato MIKADO Logo 600 3D
come renderlo pronto al volo limitando al massimo la spesa senza penalizzare le prestazioni
Iena "snake" Plisskenla scatola di montaggio prevede solo la meccanica e i palini di coda
HK-4035-560KV (12n10p)il motore scelto è uno Scorpions modello HK-4035-560KV (12n10p)
Specifications
|
Stator Diameter |
40 mm (1.56 in) |
|
Stator Thickness |
35 mm (1.024 in) |
|
No. of Stator Arms |
12 |
|
No. of Stator Poles |
10 |
|
Motor Wind |
8 Turn Delta |
|
Motor Wire |
26-Strand 0.29mm |
|
Motor Kv |
560KV RPM/Volt |
|
No-Load Current (IO/8.4v) |
2.1 Amps |
|
Motor Resistance (RM) |
0.012 Ohms |
|
Max Continuous Current |
100 Amps |
|
Max Continuous Power |
4200 Watts |
|
Weight |
437 Grams (15.29 oz) |
|
Outside Diameter |
48.9 mm (1.9 in) |
|
Shaft Diameter |
5.98 mm (0.23 in) |
|
Body Length |
61.5 mm (2.38 in) |
|
Overall Shaft Length |
86.5 mm (3.37 in) |
Sentilon100A HV 5-12S BESC (Ver4)il regolatore è un TURNIGY Sentilon100A HV 5-12S BESC (Ver4)
Specifiche tecniche
Cont Current: 100A
Burst Current: 110A
BEC Mode: N/A (no BEC)
Lipo Cells: 5-12
NiMH : 15-36
Weight: 125g
Size: 60x60x11mm
CPU Clock Speed: 12Mhz
turnigy 5-7,5 A (8-42V) HV UBEC
il bec per alimentare l'elettronica è un bec turnigy 5-7,5 A (8-42V) HV UBEC
Specifiche tecniche
Output (Constant): 5v/5A or 6v/5A
Input: 8v-42v (3-10cell lipo) High Voltage
Size: 48x27x9mm
Weight: 37g
Quiescent current: 20mA
Flightmax 5000mAh 2S1P 20Cla batteria è la sezione più delicata. Per iniziare a muovere i primi passi saranno usate 4 batterie in serie (2 celle ognuna) per un totale di 8 celle 5000 ma 20 C
La cella è ZIPPY Flightmax 5000mAh 2S1P 20C
Specifiche tecniche
Capacity: 5000mAh
Voltage: 2S1P / 2 Cell / 7.4v
Discharge: 20C Constant / 30C Burst
Weight: 262g (including wire, plug & shrink wrap)
Dimensions: 142x50x17mm
Balance Plug: JST-XH
Discharge Plug: 4mm Bullet-Connector
Align Ds 610per il piatto ciclico 3 servi Align DS 610 con ingranaggi in metallo
●Coreless Motor Design for fast speed, high efficiency, and low power consumption.
●12 Bits signal resolution for smooth movements.
●Fast speed and high torque. High strength titanium alloy gears with high precision and durable structure characteristics.
●Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.
●Supports digital & analog control signal
●Stall torque:9.6kg.cm(4.8V)
12.0kg.cm(6.0V)
●Motion speed:0.10sec/60°(4.8V)
0.08sec/60°(6.0V)
●Rating voltage:DC 4.8-6V
●Temperature range:-20°C~+60°C
●Dimension:40.3 x 20.1 x 36mm
●Weight:52.2g
Align DS 620per la coda sempre un Align digitale DS 620 che risulta addirittura più veloce del Futaba S9257
●Coreless Motor Design for fast speed, high efficiency, and low power consumption.
●12 Bits signal resolution for smooth movements.
●Fast speed and high torque. High strength titanium alloy gears with high precision and durable structure characteristics.
●Aluminum alloy mid case construction for instantaneous heat dissipation, maintaining servo’s high efficiency.
●Supports digital & analog control signal.
●Stall torque:8.0kg.cm(4.8V)
10.0kg.cm(6.0V)
●Motion speed:0.09sec/60°(4.8V)
0.07sec/60°(6.0V)
●Rating voltage:DC 4.8-6V
●Temperature range:-20°C~+60°C
●Dimension:40.3 x 20.1 x 36mm
●Weight:52.2g
Futaba R617FSRicevente Futaba RX R617FS 2.4 Ghz FASST 7CH
- Dual Antenna Diversity
| Stock # | Dimensions | Weight | Weight w/o case |
| FUTL7627 | 40 x 27 x 9 mm | 9.32 g | 6.37 g |
SAB 0335Le pale del rotore principale sono della SAB codice 0335
lunghezza 620 mm corda 56 mm
SAB 0454Le pale del rotore di coda sono della SAB codice 0454
lunghezza 95 mm corda 30 mm pinza 5 mm carbonio
Align T-Rex 600 E vs Mikado Logo 600 3D
Versione stampa 